To
order a free catalog | Click
here |
To buy AMSOIL
products, visit the AMSOIL
Online Store
|
Buy AMSOIL at wholesale prices |
Motor
Oil Test & Comparison - The Most Comprehensive Test Results
Ever Published by AMSOIL
AMSOIL Saber Synthetic 100:1
Pre-Mix 2-Cycle Oil
| |
|
New AMSOIL
Saber Professional (ATP)
and Saber Outboard (ATO)
Synthetic 2-Cycle Oils are specifically designed for
lean mix ratios in pre-mix applications. Saber Professional
contains high temperature detergents for small power
equipment. Saber Outboard contains lower temperature
dispersants for water-cooled outboard motors. Extensive
testing shows superior lubricity and cleanliness properties
at lean mix ratios of these premium synthetic formulations.
Product Code: ATP & ATO
|
| |
|
|
|
- Saber Professional is "Smokeless"
- Saber Outboard is a very
low smoke, low odor product
- At 100:1, both oils produce
lower emissions than oils mixed at 50:1
- Saber Professional is recommended
for ISO-L-EGD applications
- One mix ratio for everything
eliminates confusion
- Both oils are versatile
and very good for many applications
- Cost effective compared
to oils mixed at 50:1 or richer
- Saber Outboard exhibits
low aquatic toxicity
- Lean mix ratio prevents
plug fouling and exhaust port deposits
|
Product Description
AMSOIL Saber Professional (ATP) and
Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils are formulated
with exclusive AMSOIL synthetic base oils and premium additives.
Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle
Oils have excellent lubricity and cleanliness properties,
controlling friction and preventing wear, plug fouling, ring
sticking and exhaust port blocking. AMSOIL Synthetic 100:1
2-Cycle Oils have been protecting and providing improved performance
in two-cycle motors since 1973.
Saber Professional
Saber Professional (ATP) is specifically
designed for small engines including, but not limited to,
chain saws, lawn equipment, blowers, chop saws, pumps, scooters
and go-carts. It is also very good for use in motorcycles,
snowmobiles, ATVs, jet boats and personal watercraft. Saber
Professional is formulated with high temperature detergent
additives that prevent hard carbon deposits from forming in
these hot operating motors. Saber Professional is “smokeless”
and delivers lower emissions at 100:1 mix ratios than oils
mixed at 50:1. Equipment operators subjected to smoke and
fumes will benefit from these low emission properties. Because
one mix ratio satisfies multiple pieces of equipment, Saber
Professional eliminates mix ratio confusion.
Saber Outboard
Saber Outboard (ATO) is specifically
designed for outboard motors. It is also very good for personal
watercraft, jet boats, motorcycles, snowmobiles and ATVs.
Saber Outboard contains a heavy dose of lower temperature
dispersant additives that excel at preventing varnish and
deposits from forming in water-cooled motors. Saber Outboard
is a very low smoke, low odor, low toxicity product that produces
lower emissions at 100:1 mix ratios than oils mixed at 50:1.
It is ideal for trolling motors as it prevents “oil
loading” and plug fouling for rapid throttle response.
Operators and the environment benefit from the use of Saber
Outboard.
Applications
AMSOIL Saber 100:1 2-Cycle Oils are
recommended for 100:1 mix ratios in normal service and 50:1
to 80:1 mix ratios in severe service applications such as
commercial equipment operations and racing.
|
Equipment manufacturers and motor
builders have redesigned two-cycle motors to reduce
emissions and increase economy. These changes have increased
operating temperatures, reduced oil consumption and
incorporated direct fuel injection and exhaust power
valves. AMSOIL 2-Cycle Oils are designed to maximize
performance in all types of engine designs and are optimized
for select applications
Even though AMSOIL 2-Cycle Oils have
been optimized for specific applications, they are multi-functional
and recommended for use in many areas. The chart rates
each oil's performance abilities per application as
follows:
Excellent: The primary
recommendation for the oil. The oil is specifically
designed for the operating conditions of the motors
in these markets. There is only one "Excellent"
recommendation per category.
Vey Good: A main recommendation
for the oil. Identifies an oil that is very good for
the operating conditions of these motors.
Good: A secondary
recommendation for an oil. The oil was not specifically
designed for these applications. However, the chemistry
in the oil is suited to the operating conditions of
these motors.
Not Recommended: Identifies
applications where the product was intended for use.
Racing:
(1) Not recommended for long-term
use in outboard motors as a TC-W3 type oil, although
excellent as a race oil for short term use where motors
are periodically inspected.
(2) Excellent for racing or modified
motors. Very good for recreational use.
* Recommended for all direct fuel injected
(DFI), electronic fuel injected (EFI) and carbureted
motors. Outboard motors include Mercury®, Optimax®,
Johnson® & Evinrude® FICHT® & E-TEC®,
Yamaha® HPDI, Nissan® & Tohatsu® TLDI®. |
Which
AMSOIL Products Are Recommended For Your Car or Truck?
| Click
Here And Enter Your Vehicle Information To Find Out
|
Click
It, Print It, and Mail It
|
Printable Dealer Application |
Mail
your completed dealer application to:
AMSOIL Inc., AMSOIL Bldg, Superior,
WI 54880.
Don't worry about a street address, it will get
there.
I welcome the opportunity to
work with you personally as your servicing AMSOIL Dealer.
Use the information on this website to contact me. You may
also check out the AMSOIL
Corporate Website for product and business opportunity
information.
If you would
like more information about AMSOIL INC., click one of the
links below:
|
